Thermal conductivity distributed from a Thermal Response Test (TRT) in a borehole heat exchanger (BHE)


Submitted: 19 June 2012
Accepted: 14 March 2016
Published: 30 December 2012
Abstract Views: 1550
PDF: 4219
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.

Authors

  • A. Blasi Università di Urbino "Carlo Bo", Dipartimento di Scienze della Terra, della Vita e dell'Ambiente (DiSTeVA), Urbino, Italy.
  • M. Menichetti Università di Urbino "Carlo Bo", Dipartimento di Scienze della Terra, della Vita e dell'Ambiente (DiSTeVA), Urbino, Italy.
The Thermal Response Test (TRT) is the most versatile tool to determine the thermal propriety of the underground for designing and sizing of the borehole heat exchangers (BHE). The TRT permits to get the average thermal conductivity (λ) across the whole stratigraphy, the thermal resistance (Rb) of the borehole / grout / rocks and the undisturbed temperature of the soil (Tg). The ground temperature is influenced by climate, topographical, geological and hydrological factors. Vertical temperature changes allows to get the relationships with the lithology and especially with the groundwater. Vertical temperature log, acquired during and after the TRT, permits to calculate the distributed thermal conductivity over each stratigraphic interval. This method permits to verify how the different lithologies and the groundwater contribute to the heat exchange in the borehole/ground system, so called geoexchange. The experimental site test indicates that the marls and clayed-marls levels show a higher thermal inertia than the sandstone ones and then lower values of thermal conducivity. The sandstones have a higher thermal conductivity with a rapid cooling and they provide the main contribution to the ground heat exchange. The distributed thermal conductivity is an useful tool for designing the BHE with the best performance, a better economic return and with low environmental impacts.

Blasi, A., & Menichetti, M. (2012). Thermal conductivity distributed from a Thermal Response Test (TRT) in a borehole heat exchanger (BHE). Acque Sotterranee - Italian Journal of Groundwater, 1(3). https://doi.org/10.7343/as-010-12-0027

Downloads

Download data is not yet available.

Citations